Most of the industrial and Commercials installations have large variables inductive severe loads such as motors, CNC Machines, Air conditioners, Variable Frequency Drives, Thyristor Drives, etc. This results in lagging of Power factor. This means loss and wastage of Electrical resources and heavy Penalties by Electricity Board. In some cases such as fixed load system, manually operated capacitor banks are used but this is not correct solutions because chances of Switching ON and OFF are done by Operator.
However in case of rapidly varying and scattered loads it becomes difficult to maintain a high power factor by manually switching on/off the capacitors in proportion to variation of load within an installation. This drawback is overcome by using an APFC panel (Automatic Power Factor Correction Panel) which not only maintains a power factor but also eliminates the need for constant manual interference
a) Please contact our sales and application engineers for further guidance
b) Non-Standard Input Voltage Range and Output Voltages are also available on request
| Rating | 30 – 1200 KVAR |
| Steps | 2 / 3 / 5 / 6 / 10 / 12.5 / 20 / 25 / 30 / 40 / 50 / 60 / 75 / 80 KVAR |
| Sensing | Single / Three CT Sensing. |
| PF Controller | LCD Display for PF. LCD Display for PF & Power Parameters. |
| Incomer | MCCB / ACB for Over load and short circuit protection. |
| Each Step Protection | 1)HRC Fuse 2)MCB / MCCB |
| Detune Reactors Copper / Aluminum | 1)Without 2) 1 % 3) 5.6 % 4) 7 % 5) 14 % |
| Capacitors MPP / Gas Field / APP | 1)440 Volts. 2)525 Volts. 3)690 Volts |
| Contactor Switch | 1)Capacitor duty contactor. 2)AC 3 Duty Contactor. 3)With Early make contact |
| Communication | RS 485 / RS 232 Optional. |
